YX250GY-C5K
根据客户要求
LB425Y5K（根据客户要求）
| 1、 Vehicle parameters | ||
| Name of the parameter item | The value of the parameter item | |
| Dimensions (length×width×height) mm | 2110×810×1450 | |
| Wheelbase mm | 1360 | |
| Minimum ground clearance mm | 265 | |
| Seat cushion height mm | 910 | |
| Lever Swing Corner (Left/Right) | 34 | |
| Minimum turning radius mm | 2340 | |
| Final gear ratio | 16:42 | |
| Gradeability | 30 | |
| Number of seats | 1 (except driver) | |
| Shift mode | International 5th gear | |
| Fuel tank volume L | 10 | |
| Type of fuel | gasoline | |
| Rated maximum load mass Kg | 150 | |
| The dry weight of the whole vehicle is kg | A total of 134 front 63 rear 71 | |
| Passenger mass kg for 1 person | A total of 209 front, 91 and 118 rear | |
| Passenger mass kg for 2 passengers | A total of 284 front, 98, and 186 rear | |
| Curb weight Kg | A total of 144 front, 68, and 76 rear | |
| The maximum total load mass is kg | 292 | |
| The maximum speed is km/h | 95 | |
| Braking performance m | 7 | |
| Starting performance S | ≤15（0-200M） | |
| Fuel consumption L/100Km | 2.9 | |
| Braking method | Front wheel | Disc brakes |
| Rear wheels | Disc brakes | |
| Brake operation | Front wheel | Hand brake |
| Rear wheels | Foot brake | |
| Rim type | Mesh wheels | |
| Rim specifications | 1.85χ21 in front and 2.15χ18 in the rear | |
| Tire type | Off-road tires | |
| Tire specifications | Front/90/100-21 Rear/110/100-18 | |
| Tire pressure (front/rear) Kpa | Front 225/Rear 280 | |
| Large bulb specifications and illumination | 12V 7W/15.1W | |
| Turn Bulb Specifications | 12V 1.56W | |
| Battery specifications | MG6.5L/Gel battery | |
| Second, the engine parameters | ||
| Engine type | NT250 external balancer shaft, single-cylinder, four-stroke, air-cooled | |
| Magneto type | 12V 8-pole full-wave AC | |
| Stroke mm | 66.6mm | |
| Bore mm | 65.5mm | |
| Cylinder working volume ml | 225ml | |
| Compression ratio | 9.2：1 | |
| Fuel grades | RQ90 | |
| Total oil capacity L | 1.2 | |
| Spark plug model | D8RTC | |
| Spark plug clearance mm | 0.6~0.7 | |
| Valve clearance mm | 0.05±0.02mm | |
| Start mode | Electric/Foot starting | |
| Lubricant grades | 15W/40 | |
| Lubrication method | Pressure spatter | |
| Ignition method | CDI | |
| Carburetor model | PZ30 | |
| Carburetor type | Plunger type | |
| Transmission type | Five international gears | |
| Clutch type | Manual, wet multi-piece | |
| Primary gear ratio | 3.333 | |
| Gear ratio | 1st gear: 2.769 , 2nd gear: 1.882, 3rd gear: 1.400 , 4th gear: 1.130, 5th gear: 0.960 | |
| Output transmission mode | Chain drive | |
| Direction of rotation of the output shaft | Facing the output shaft, rotate counterclockwise | |
| Dimensions (length×width×height) mm | 330×318×390 | |
| Net weight Kg | 35Kg | |
| Magneto ignition advance angle | 15º ±2º before top dead center | |
| Maximum net power and its corresponding speed kW(r/min±5%) | 12.5Kw/7000r/min | |
| Maximum torque and corresponding speed N.m(r/min±5%) | 19N.m/5500r/min | |
| The minimum fuel consumption rate is less than g/KW.h | ≤354 | |
登录
