YX200GY-C5A
一、specification | ||||
English item | specification | |||
Overall dimension (length × wide × Height) mm | 2210×885×1160mm | |||
Wheelbase mm | 1360 | |||
Minimum ground clearance mm | 265 | |||
Seat cushion height mm | 880 | |||
Operating handle return angle (left/right) | ≤40° | |||
Minimum turning radius mm | 2120 | |||
Final transmission ratio | 17:50 | |||
Climbing slope | ≥28° | |||
Seats | 2 | |||
Shift mode | Five-gear international | |||
Fuel tank volume L | 11.5 | |||
Fuel type | 90# | |||
Rated maximum load kg | 150 | |||
Net weight kg | 117 | |||
Curb weight Kg | 124 | |||
Maximum load total kg | ||||
Maximum speed Km/h | 97。4 | |||
Braking performance m | ≤7m/30km/h | |||
Starting performance S | ≤15S | |||
Rated power Kw/r/min | 7KW/7500±500r/min | |||
Economic fuel consumption L/100Km | 2.9 | |||
Brake | front | Disc brake | ||
rear | Hub brake | |||
Brake operation | front | Hand brake | ||
rear | foot brake | |||
wheel | Spoke wheel | |||
spoke wheel size | front:1.4×21 rear :2.15×18 | |||
tyre | Inner and outer tyre | |||
tyre size | front:2.75-21 rear:4.60-18 | |||
Tyre pressure (front/rear) Kpa | 280/280 | |||
Specification and illumination of large bulb | 12V-35W/35W ≥10000cd | |||
Steering bulb specification | 12V-10W | |||
Battery specification | 12V/6.5AH/ Semi-free battery /140×68×100 | |||
二、 ENGINE SPECIFICATION | ||||
Engine type | CB200, single cylinder, four stroke, natural air cooling | |||
Magneto type | 12V/level 8/full wave, | |||
Stroke mm | 62.2 | |||
Cylinder diameter mm | 63.5 | |||
Working volume of cylinder ml | 196 | |||
Compression ratio | 9.0:1 | |||
Fuel grade | 90 # gasoline | |||
Total oil capacity L | 1.1 | |||
Spark plug model | D8RTC | |||
Spark plug gap mm | 0.6~0.7 | |||
Valve clearance mm | 0.05±0.02mm | |||
Starting mode | Electric start/kick start | |||
Lubricating oil grade | 15W/40 | |||
Lubrication method | Splash pressure lubrication | |||
Ignition mode | CFW capacitive energy storage | |||
Carburetor model | PZ30 | |||
Carburetor type | Horizontal suction plunger type | |||
Transmission type | Constant mesh two-stage transmission and five-speed transmission | |||
Clutch type | Multi-disc oil bath manual clutch | |||
Primary gear ratio | 4.055 | |||
Gearshift ratio | i1=2.769 ,i2=1.882.i3=1.400,i4=1.130,i5=0.960 | |||
Output transmission mode | Chain drive | |||
Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
Overall dimension (length × wide × Height) mm | 330×318×390 | |||
Net mass Kg | 30.5±1 | |||
Magneto ignition advance angle | 27º±2º | |||
Rated power and corresponding speed kW (r/min ± 5%) | 9.5KW/7500±500r/min | |||
Maximum net power and corresponding speed kW (r/min ± 5%) | 8.5Kw/8000r/min | |||
Maximum torque and corresponding speed N.m (r/min ± 5%) | 12N.m/7000±500r/min | |||
The minimum fuel consumption rate is less than g/Kw. h | 354g/KW.h |
登录