YX300GY-CJ
170FMN
LB430YCJ
一、specification | ||||
English item | specification | |||
Overall dimension (length × wide × Height) mm | 2180×810×1280mm | |||
Wheelbase mm | 1470 | |||
Minimum ground clearance mm | 300 | |||
Seat cushion height mm | 960 | |||
Operating handle return angle (left/right) | ≤48° | |||
Minimum turning radius mm | 2400 | |||
Final transmission ratio | 13:42 | |||
Climbing slope | ≥22° | |||
Seats | 1 | |||
Shift mode | Five-gear international | |||
Fuel tank volume L | 6.5 | |||
Fuel type | 90# | |||
Rated maximum load kg | 75 | |||
Net weight kg | 132.5 | |||
Curb weight Kg | 139 | |||
Maximum load total kg | 75 | |||
Maximum speed Km/h | 99 | |||
Braking performance m | ≤7m/30km/h | |||
Starting performance S | ≤15S | |||
Rated power Kw/r/min | 13KW/7000r/min | |||
Economic fuel consumption L/100Km | 2.7 | |||
Brake | front | Disk type | ||
rear | Disk type | |||
Brake operation | front | Hand brake | ||
rear | foot brake | |||
wheel | Net wheel | |||
spoke wheel size | front:1.85×21 rear :2.15×18 | |||
tyre | off -raod tyre | |||
tyre size | front:90/100-21 rear:110/100-18 | |||
Tyre pressure (front/rear) Kpa | 225/225 | |||
Specification and illumination of large bulb | 12V-35W/35W ≥10000cd | |||
Steering bulb specification | 12V-10W | |||
Battery specification | GTX9A-BS/ Semi-maintenance-free battery /135*75*135/ with electrolyte | |||
二、 ENGINE SPECIFICATION | ||||
Engine type | Four-stroke, air-cooled, single-cylinder, vertical | |||
Magneto type | 12V/12 pole full DC | |||
Stroke mm | 70.2 | |||
Cylinder diameter mm | 70 | |||
Working volume of cylinder ml | 270.2 | |||
Compression ratio | 9.2:1 | |||
Fuel grade | 90 # gasoline | |||
Total oil capacity L | 1.2 | |||
Spark plug model | D8RTC | |||
Spark plug gap mm | 0.6~0.7 | |||
Valve clearance mm | 0.03±0.05mm | |||
Starting mode | Electric start/kick start | |||
Lubricating oil grade | 15W/40 | |||
Lubrication method | Splash pressure lubrication | |||
Ignition mode | C.D.I | |||
Carburetor model | PWK34 | |||
Carburetor type | Horizontal suction plunger type | |||
Transmission type | Constant mesh two-stage transmission and five-speed transmission | |||
Clutch type | Multi-disc oil bath manual clutch | |||
Primary gear ratio | 3.333 | |||
Gearshift ratio | i1=2.769 ,i2=1.882.i3=1.400,i4=1.130,i5=0.960 | |||
Output transmission mode | Chain drive | |||
Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
Overall dimension (length × wide × Height) mm | 330×318×390 | |||
Net mass Kg | 35±1 | |||
Magneto ignition advance angle | 10º±1º | |||
Rated power and corresponding speed kW (r/min ± 5%) | 13Kw/7000r/min | |||
Maximum net power and corresponding speed kW (r/min ± 5%) | ||||
Maximum torque and corresponding speed N.m (r/min ± 5%) | 20.5N.m/5500r/minin | |||
The minimum fuel consumption rate is less than g/Kw. h | 354g/KW.h |
登录