YX125-KBCS2G
1P51FMH
| 一、specification | ||||
| English item | specification | |||
| Overall dimension (length × wide × Height) mm | 1930×690×1100mm | |||
| Wheelbase mm | 1240 | |||
| Minimum ground clearance mm | 130 | |||
| Seat cushion height mm | 790 | |||
| Operating handle return angle (left/right) | ≤48° (left ≤45° right ≤44°) | |||
| Minimum turning radius mm | 1870 left, 1825 right | |||
| Final transmission ratio | 14:36 | |||
| Climbing slope | ≥23° | |||
| Seats | 2 | |||
| Shift mode | Four-speed semi-rotation | |||
| Fuel tank volume L | 3.3 | |||
| Fuel type | 90# | |||
| Rated maximum load kg | 145 | |||
| Net weight kg | 90 | |||
| Curb weight Kg | 95 | |||
| Maximum load total kg | 246 | |||
| Maximum speed Km/h | 85 | |||
| Braking performance m | ≤7m/30km/h | |||
| Starting performance S | 13.73s(≤15s) | |||
| Rated power Kw/r/min | 4.5Kw | |||
| Economic fuel consumption L/100Km | 1.7 | |||
| Brake | front | disc brake | ||
| rear | disc brake | |||
| Brake operation | front | Hand brake | ||
| rear | foot brake | |||
| wheel | Net wheel | |||
| spoke wheel size | front：1.4×17 rear ：1.6×17 | |||
| tyre | off -raod tyre | |||
| tyre size | front：2.50-17 rear：2.75-17 | |||
| Tyre pressure (front/rear) Kpa | 200/225 | |||
| Specification and illumination of large bulb | 12V-35W/35W ≥10000cd | |||
| Steering bulb specification | 12V-10W | |||
| Battery specification | 12N7B-4B/ Water Bottle /150*87*95/ No electrolyte/Eagle Head plate | |||
| 二、 ENGINE SPECIFICATION | ||||
| Engine type | Single cylinder, four stroke, air cooled, horizontal,SOHC-2V | |||
| Magneto type | Flywheel rotor type | |||
| Stroke mm | 55.5 | |||
| Cylinder diameter mm | 51 | |||
| Working volume of cylinder ml | 113.37 | |||
| Compression ratio | 9.2：1 | |||
| Fuel grade | 92 # gasoline | |||
| Total oil capacity L | 1.1 | |||
| Spark plug model | CPR6E-9 | |||
| Spark plug gap mm | 0.6～0.7 | |||
| Valve clearance mm | 0.05±0.02mm | |||
| Starting mode | Foot recoil mode/electric start | |||
| Lubricating oil grade | 15W/40 | |||
| Lubrication method | Splash pressure lubrication | |||
| Ignition mode | C.D.I | |||
| Carburetor model | PZ20 | |||
| Carburetor type | Horizontal suction plunger type | |||
| Transmission type | Four-speed semi-rotation | |||
| Clutch type | Multi-disc oil bath manual clutch | |||
| Primary gear ratio | 4.058 | |||
| Gearshift ratio | i1=2.62, i2=1.56, i3=1.14, i4= 0.92, | |||
| Output transmission mode | Chain drive | |||
| Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
| Overall dimension (length × wide × Height) mm | 450×290×230 | |||
| Net mass Kg | 25±1 | |||
| Magneto ignition advance angle | 15º±2º | |||
| Rated power and corresponding speed kW (r/min ± 5%) | 7.25KW/8500rpm | |||
| Maximum net power and corresponding speed kW (r/min ± 5%) | 7.32KW/8500 rpm | |||
| Maximum torque and corresponding speed N.m (r/min ± 5%) | 9.23N.m/6500 rpm | |||
| The minimum fuel consumption rate is less than g/Kw. h | ≤354g/Kw.h | |||
登录
