YX50-K8A
136FMA
LB405P8A
一、Vehicle parameters | ||||
Parameter item name | Value of parameter item | |||
Dimensions (length x width x height) mm | 1880×750×1070 | |||
wheelbase mm | 1250 | |||
Minimum ground clearance distance mm | 150 | |||
Seat cushion height mm | 840 | |||
Operate the turning angle (left/right) | <45 | |||
minimum turning radius mm | 1800 | |||
Final transmission ratio | 41/12=3.41 | |||
gradeability | 14° | |||
Seats | 2 | |||
Shift mode | artificial | |||
Fuel tank capacity L | 4.2 | |||
fuel type | 93 octane gasoline | |||
Rated maximum load mass Kg | 150 | |||
Vehicle dry weight kg | 92 | |||
Vehicle curb weight Kg | 96 | |||
Factory determined maximum total load mass Kg | 246 | |||
maximum speed Km/h | 56 | |||
brake performance m | 7 | |||
starting performance S | <15 | |||
rated power Kw/r/min | 2.2kw/8000r/min | |||
Economic fuel consumption L/100Km | 1.2 | |||
Braking method | front wheel | hand | ||
rear-wheel | hand | |||
Braking operation mode | front wheel | dish | ||
rear-wheel | dish | |||
Wheel rim type | Net wheel | |||
Rim Specifications | 2.15-17/2.15-17 | |||
Tire type | Off road deep toothed tires | |||
Tire Size | 90/80-17/110/70-17 | |||
Tire pressure (front/rear) Kpa | 225/250 | |||
Specification and illuminance of large light bulb | 12V/11.2W/22.08W illuminance25000cd | |||
Specification of front/rear turn signal bulb | 12V/0.84W/1.2W | |||
Battery specifications and external dimensions (length x width x height) mm | MG5-3B/Colloidal battery/120*60*130 | |||
二、Engine parameters | ||||
engine type | Single cylinder/four stroke/air-cooled/horizontal | |||
Magnetic motor type | 12V 8 poles full wave | |||
trip mm | 49.5 | |||
Cylinder diameter mm | 35.8 | |||
Displacement ml | 49.5 | |||
Compression ratio | 10.8:1 | |||
Fuel grade | 93 octane gasoline | |||
Total oil capacity L | 0.8 | |||
Spark plug model | A7RTC | |||
sparking plug gap mm | 0.6~0.7 | |||
valve clearance mm | 0.05±0.02mm | |||
Start mode | Electric/Foot | |||
Lubricating oil grade | SAE-10W/40 SG | |||
Lubrication method | Splash lubrication and pressure lubrication | |||
Ignition method | C.D.I. | |||
carburetor type | EPZ20 | |||
Carburetor type | plunger type | |||
Transmission type | artificial | |||
Clutch type | automatic | |||
Primary transmission ratio | 4.059 | |||
Variable speed ratio | i1=2.833,i1=1.706.i3=1.238,i4=0.958 | |||
Output transmission mode | chain drive | |||
Output shaft rotation direction | anticlockwise | |||
Dimensions (length x width x height) mm | 460×300×260 | |||
net mass Kg | 18±1 | |||
Magnetic motor ignition advance angle | 15°±2° (<2000r/min) | |||
Calibrated power and corresponding speed kW(r/min±5%) | 2.2/8000 | |||
Maximum net power and its corresponding rotational speed kW(r/min±5%) | 2.5kw/8000r/min | |||
Maximum torque and corresponding speed N.m(r/min±5%) | 3.0Nm/5000r/min | |||
The minimum fuel consumption rate is less than g/Kw.h | 367 |
登录