YX125-CEM2G
154fmi
| 一、specification | ||||
| English item | specification | |||
| Overall dimension (length × wide × Height) mm | 2000×670×1100mm | |||
| Wheelbase mm | 1270 | |||
| Minimum ground clearance mm | 110 | |||
| Seat cushion height mm | 790 | |||
| Operating handle return angle (left/right) | ≤48° | |||
| Minimum turning radius mm | 1850 | |||
| Final transmission ratio | 14：36 | |||
| Climbing slope | ≥23° | |||
| Seats | 2 | |||
| Shift mode | Fourth gear out of rotation | |||
| Fuel tank volume L | 4.2 | |||
| Fuel type | 90# | |||
| Rated maximum load kg | 145 | |||
| Net weight kg | 94 | |||
| Curb weight Kg | 99 | |||
| Maximum load total kg | 245 | |||
| Maximum speed Km/h | 80 | |||
| Braking performance m | ≤7m/30km/h | |||
| Starting performance S | ≤15S | |||
| Rated power Kw/r/min | 4.6Kw | |||
| Economic fuel consumption L/100Km | ≤1.5 | |||
| Brake | front | Disc brake | ||
| rear | Drum brake | |||
| Brake operation | front | Hand brake | ||
| rear | foot brake | |||
| wheel | Aluminum wheel | |||
| spoke wheel size | front：1.4×17 rear ：1.6×17 | |||
| tyre | Inner and outer tyre | |||
| tyre size | front：2.50-17 rear：2.75-17 | |||
| Tyre pressure (front/rear) Kpa | 220/280 | |||
| Specification and illumination of large bulb | 12V-35W/35W ≥10000cd | |||
| Steering bulb specification | 12V-10W | |||
| Battery specification | 12N7B-4B/ Water Bottle /150*87*95/ No electrolyte/Eagle Head plate | |||
| 二、 ENGINE SPECIFICATION | ||||
| Engine type | Four stroke, air - cooled, single cylinder, horizontal | |||
| Magneto type | 12V/8 pole/full wave DC | |||
| Stroke mm | 55.5 | |||
| Cylinder diameter mm | 54 | |||
| Working volume of cylinder ml | 127 | |||
| Compression ratio | 8.7：1 | |||
| Fuel grade | RQ-93 | |||
| Total oil capacity L | 0.8L | |||
| Spark plug model | a7tc/a7rtc | |||
| Spark plug gap mm | 0.6～0.7 | |||
| Valve clearance mm | 0.05±0.02mm | |||
| Starting mode | Foot recoil mode/electric start | |||
| Lubricating oil grade | 15W/40 | |||
| Lubrication method | Splash pressure lubrication | |||
| Ignition mode | C.D.I | |||
| Carburetor model | PZ19 | |||
| Carburetor type | Plunger type | |||
| Transmission type | Four-speed half cycle | |||
| Clutch type | Multi - piece oil bath automatic clutch | |||
| Primary gear ratio | 14/34 | |||
| Gearshift ratio | First gear 2.833, second gear 1.706, third gear 1.238, fourth gear 0.958, | |||
| Output transmission mode | Chain drive | |||
| Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
| Overall dimension (length × wide × Height) mm | 460×300×260 | |||
| Net mass Kg | 21±1Kg | |||
| Magneto ignition advance angle | 27º±2º | |||
| Rated power and corresponding speed kW (r/min ± 5%) | 4.4KW/8000±500r/min | |||
| Maximum net power and corresponding speed kW (r/min ± 5%) | 6.3Kw/8000±500rpm | |||
| Maximum torque and corresponding speed N.m (r/min ± 5%) | 5.5N.m/5000±500r/min | |||
| The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h | |||
登录
