YX250-CKD
| 一、specification | ||||
| English item | specification | |||
| Overall dimension (length × wide × Height) mm | 2080x770x1100mm | |||
| Wheelbase mm | 1350 mm | |||
| Minimum ground clearance mm | 160mm | |||
| Seat cushion height mm | 790 mm | |||
| Operating handle return angle (left/right) | ≤35° | |||
| Minimum turning radius mm | ||||
| Final transmission ratio | 520 13:39 | |||
| Climbing slope | ≥22° | |||
| Seats | 2 | |||
| Shift mode | Five-gear international | |||
| Fuel tank volume L | 12L | |||
| Fuel type | 92# | |||
| Rated maximum load kg | 150 | |||
| Net weight kg | 126 | |||
| Curb weight Kg | 138 | |||
| Maximum load total kg | ||||
| Maximum speed Km/h | 105 | |||
| Braking performance m | ≤7m/30km/h | |||
| Starting performance S | ≤12S | |||
| Rated power Kw/r/min | ||||
| Economic fuel consumption L/100Km | 2.2 | |||
| Brake | front | Right hand hydraulic disc brake | ||
| rear | Hydraulic disc brake | |||
| Brake operation | front | Hand brake | ||
| rear | foot brake | |||
| wheel | Spoke wheel | |||
| spoke wheel size | front：2.75×17 rear ：3.5×17 | |||
| tyre | off -raod tyre | |||
| tyre size | front：120/80 - 17 rear：140/70 - 17 | |||
| Tyre pressure (front/rear) Kpa | 200/225 | |||
| Specification and illumination of large bulb | LED lens | |||
| Steering bulb specification | LED | |||
| Battery specification | GTX9-BS/ Semi-maintenance-free battery /150*87*105/ with electrolyte | |||
| 二、 ENGINE SPECIFICATION | ||||
| Engine type | Single cylinder vertical CBB250, oil cooled, external balance shaft | |||
| Magneto type | Flywheel rotor type, 12V12 pole full DC | |||
| Stroke mm | 65 | |||
| Cylinder diameter mm | 70 | |||
| Working volume of cylinder ml | 250 | |||
| Compression ratio | 9.2：1 | |||
| Fuel grade | 93 # gasoline | |||
| Total oil capacity L | 1700ml | |||
| Spark plug model | NGK DR8EA | |||
| Spark plug gap mm | 0.6～0.7 | |||
| Valve clearance mm | 0.05mm | |||
| Starting mode | Electric start/kick start | |||
| Lubricating oil grade | 15W/40 | |||
| Lubrication method | Splash pressure lubrication | |||
| Ignition mode | AC-CDI | |||
| Carburetor model | PZ32 | |||
| Carburetor type | Horizontal suction plunger type | |||
| Transmission type | Constant mesh two-stage transmission and five-speed transmission | |||
| Clutch type | Multi-disc oil bath manual clutch | |||
| Primary gear ratio | 3.333 | |||
| Gearshift ratio | i1=2.769,i2=1.882.i3=1.400 ,i4=1.130，i5=0.960 | |||
| Output transmission mode | Chain drive | |||
| Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
| Overall dimension (length × wide × Height) mm | 330×318×390 | |||
| Net mass Kg | 35±1 | |||
| Magneto ignition advance angle | 10º±1º | |||
| Rated power and corresponding speed kW (r/min ± 5%) | ||||
| Maximum net power and corresponding speed kW (r/min ± 5%) | 11.5Kw/8000r/min | |||
| Maximum torque and corresponding speed N.m (r/min ± 5%) | 16.2N.m/6500r/min | |||
| The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h | |||
登录
