YX300-CXC
一、specification | ||||
English item | specification | |||
Overall dimension (length × wide × Height) mm | 1985x 780 x 1090mm | |||
Wheelbase mm | 1350mm | |||
Minimum ground clearance mm | 160mm | |||
Seat cushion height mm | 800mm | |||
Operating handle return angle (left/right) | ≤35° | |||
Minimum turning radius mm | / | |||
Final transmission ratio | 13:39 | |||
Climbing slope | ≥22° | |||
Seats | 2 | |||
Shift mode | Manual labor | |||
Fuel tank volume L | / | |||
Fuel type | 92# | |||
Rated maximum load kg | 150 | |||
Net weight kg | 138 | |||
Curb weight Kg | 156 | |||
Maximum load total kg | / | |||
Maximum speed Km/h | 120 | |||
Braking performance m | ≤7m/30km/h | |||
Starting performance S | ≤12S | |||
Rated power Kw/r/min | / | |||
Economic fuel consumption L/100Km | 2.8 | |||
Brake | front | Right hand hydraulic disc brake | ||
rear | Hydraulic disc brake | |||
Brake operation | front | Hand brake | ||
rear | foot brake | |||
wheel | Aluminum wheel | |||
spoke wheel size | front:3.0×17 rear :4.0×17 | |||
tyre | Inclined rubber | |||
tyre size | front:110/70 - 17 rear:140/60 - 17 | |||
Tyre pressure (front/rear) Kpa | 200/225 | |||
Specification and illumination of large bulb | / | |||
Steering bulb specification | / | |||
Battery specification | GTX9-BS/ Semi-maintenance-free battery /150*87*105/ with electrolyte | |||
二、 ENGINE SPECIFICATION | ||||
Engine type | Single cylinder vertical 200, liquid cooled, SOHC-4V four valves, built-in balance shaft | |||
Magneto type | Flywheel rotor type, 12V12 pole full DC | |||
Stroke mm | 64 | |||
Cylinder diameter mm | 75 | |||
Working volume of cylinder ml | 282.7 | |||
Compression ratio | 10.8:1 | |||
Fuel grade | 93 # gasoline | |||
Total oil capacity L | 1700ml | |||
Spark plug model | NGK CR8EA | |||
Spark plug gap mm | 0.6~0.7 | |||
Valve clearance mm | 0.05±0.02mm | |||
Starting mode | Electric start/kick start | |||
Lubricating oil grade | 15W/40 | |||
Lubrication method | Splash pressure lubrication | |||
Ignition mode | C.D.I | |||
Carburetor model | PZ34 | |||
Carburetor type | Horizontal suction plunger type | |||
Transmission type | Constant mesh two-stage transmission and five-speed transmission | |||
Clutch type | Multi-disc oil bath manual clutch | |||
Primary gear ratio | 3.0909 | |||
Gearshift ratio | i1=3.0 , i2=2.071. i3=1529, i4=1.150,i5=0.954 | |||
Output transmission mode | Chain drive | |||
Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
Overall dimension (length × wide × Height) mm | 330×318×390 | |||
Net mass Kg | 36.5±0.5 | |||
Magneto ignition advance angle | 10º±1º | |||
Rated power and corresponding speed kW (r/min ± 5%) | / | |||
Maximum net power and corresponding speed kW (r/min ± 5%) | 21Kw/8500r/min | |||
Maximum torque and corresponding speed N.m (r/min ± 5%) | 25.5N.m/7000r/min | |||
The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h |
登录