YX125-CKA
156FMI（125cc）
| English item | specification | |||
| Overall dimension (length × wide × Height) mm | 2010 x720x 1110mm | |||
| Wheelbase mm | 1230 | |||
| Minimum ground clearance mm | 165 | |||
| Seat cushion height mm | 790 | |||
| Operating handle return angle (left/right) | ≤48° | |||
| Minimum turning radius mm | 1200 | |||
| Final transmission ratio | 3.00 | |||
| Climbing slope | ≥28° | |||
| Seats | 2 | |||
| Shift mode | No cycle in fourth gear | |||
| Fuel tank volume L | 11.5 | |||
| Fuel type | gasoline | |||
| Rated maximum load kg | 150 | |||
| Net weight kg | 103 | |||
| Curb weight Kg | 115 | |||
| Maximum load total kg | 180 | |||
| Maximum speed Km/h | 81 | |||
| Braking performance m | ≤7m/30km/h | |||
| Starting performance S | ≤15S | |||
| Rated power Kw/r/min | 5.8KW/7500±500r/min | |||
| Economic fuel consumption L/100Km | 1.9 | |||
| Brake | front | Drum brake | ||
| rear | Drum brake | |||
| Brake operation | front | Hand brake | ||
| rear | foot brake | |||
| wheel | Net wheel | |||
| spoke wheel size | front：1.60×17 rear ：1.85×17 | |||
| tyre | ordinary | |||
| tyre size | front：2.50－17 rear：3.00－17 | |||
| Tyre pressure (front/rear) Kpa | 280/280 | |||
| Specification and illumination of large bulb | 12V-35W/35W ≥10000cd | |||
| Steering bulb specification | 12V-10W | |||
| Battery specification | 12N2.5-3C/80×70×105 | |||
| 二、 ENGINE SPECIFICATION | ||||
| Engine type | Four-stroke, air-cooled, single-cylinder, vertical | |||
| Magneto type | Multi-disc oil bath manual clutch | |||
| Stroke mm | 50.6 | |||
| Cylinder diameter mm | 56 | |||
| Working volume of cylinder ml | 125 | |||
| Compression ratio | 8.8：1 | |||
| Fuel grade | 93 # gasoline | |||
| Total oil capacity L | 0.85L | |||
| Spark plug model | A6RTC | |||
| Spark plug gap mm | 0.7～0.8 | |||
| Valve clearance mm | 0.05±0.02mm | |||
| Starting mode | Foot starting | |||
| Lubricating oil grade | 15W/40 | |||
| Lubrication method | Splash pressure lubrication | |||
| Ignition mode | C.D.I | |||
| Carburetor model | PZ20 | |||
| Carburetor type | Horizontal suction plunger type | |||
| Transmission type | No cycle in fourth gear | |||
| Clutch type | Multi-disc oil bath manual clutch | |||
| Primary gear ratio | 3.4762 | |||
| Gearshift ratio | i1=3.273, i2=1.895. i3=1.280, i4=0.964 | |||
| Output transmission mode | Chain drive | |||
| Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
| Overall dimension (length × wide × Height) mm | 310×325×400 | |||
| Net mass Kg | 20±1 | |||
| Magneto ignition advance angle | 15º±1º | |||
| Rated power and corresponding speed kW (r/min ± 5%) | ||||
| Maximum net power and corresponding speed kW (r/min ± 5%) | 5.8kW/7500±500rpm | |||
| Maximum torque and corresponding speed N.m (r/min ± 5%) | 8.6N.m/5500±500rpm | |||
| The minimum fuel consumption rate is less than g/Kw. h | 354g/KW.h | |||
登录
