YX100-CK
153FML
| English item | specification | |||
| Overall dimension (length × wide × Height) mm | 1870 x850x 1230mm | |||
| Wheelbase mm | 1265 | |||
| Minimum ground clearance mm | 200 | |||
| Seat cushion height mm | 815 | |||
| Operating handle return angle (left/right) | ≤48° | |||
| Minimum turning radius mm | 600 | |||
| Final transmission ratio | 3.00 | |||
| Climbing slope | ≥23° | |||
| Seats | 3 | |||
| Shift mode | No cycle in fourth gear | |||
| Fuel tank volume L | 11.5 | |||
| Fuel type | gasoline | |||
| Rated maximum load kg | 150 | |||
| Net weight kg | 100 | |||
| Curb weight Kg | 110 | |||
| Maximum load total kg | 100 | |||
| Maximum speed Km/h | 80 | |||
| Braking performance m | ≤7m/30km/h | |||
| Starting performance S | ≤15S | |||
| Rated power Kw/r/min | 5.3KW/7500±500r/min | |||
| Economic fuel consumption L/100Km | 1.97 | |||
| Brake | front | Drum brake | ||
| rear | Drum brake | |||
| Brake operation | front | Hand brake | ||
| rear | foot brake | |||
| wheel | Net wheel | |||
| spoke wheel size | front：1.6×17 rear ：1.85×17 | |||
| tyre | ordinary | |||
| tyre size | front：2.50-17 rear：3.00-17 | |||
| Tyre pressure (front/rear) Kpa | 225/250 | |||
| Specification and illumination of large bulb | 12V-35W/35W ≥10000cd | |||
| Steering bulb specification | 12V-10W | |||
| Battery specification | 12N2.5-3C/80×70×105 | |||
| 二、 ENGINE SPECIFICATION | ||||
| Engine type | Four-stroke, air-cooled, single-cylinder, vertical | |||
| Magneto type | Multi-piece oil bath type (manual clutch) | |||
| Stroke mm | 45 | |||
| Cylinder diameter mm | 53 | |||
| Working volume of cylinder ml | 99.3 | |||
| Compression ratio | 9.6：1 | |||
| Fuel grade | 93 # gasoline | |||
| Total oil capacity L | 0.8L | |||
| Spark plug model | A6RTC | |||
| Spark plug gap mm | 0.7～0.8 | |||
| Valve clearance mm | 0.05±0.02mm | |||
| Starting mode | Foot starting | |||
| Lubricating oil grade | 15W/40 | |||
| Lubrication method | Splash pressure lubrication | |||
| Ignition mode | C.D.I | |||
| Carburetor model | PG18 | |||
| Carburetor type | Horizontal suction plunger type | |||
| Transmission type | No cycle in fourth gear | |||
| Clutch type | Multi-disc oil bath manual clutch | |||
| Primary gear ratio | 3.4762 | |||
| Gearshift ratio | i1=3.273 , i2=1.895. i3=1.280, i4=0.964 | |||
| Output transmission mode | Chain drive | |||
| Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
| Overall dimension (length × wide × Height) mm | 310×325×400 | |||
| Net mass Kg | 21 | |||
| Magneto ignition advance angle | 15º±1º | |||
| Rated power and corresponding speed kW (r/min ± 5%) | 5.3KW/7500±500r/min | |||
| Maximum net power and corresponding speed kW (r/min ± 5%) | 5.36Kw/8000r/min | |||
| Maximum torque and corresponding speed N.m (r/min ± 5%) | 7.5N.m/5500±500r/min | |||
| The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h | |||
登录
